Published 2026 Australian pricing guides put residential electricians at roughly $80–$140 an hour, with call-out fees of about $50–$140 on top. These are broad market estimates, not a set industry rate. Your bill depends on the job, your location, when you book and what the quote includes, so a written quote from a licensed electrician is the only reliable figure for your home.

Electrician costs in Australia at a glance
Most electricians charge either an hourly rate plus a call-out or service fee, or a fixed price for a clearly defined job. Pricing guides published in 2026 give the indicative ranges below. They are useful for budgeting, but they are not quotes, regulated rates or a promise of what your invoice will say.
ServiceSeeking reported an average quoted hourly rate of about $116 across electrician jobs on its platform in early 2026, with roughly three-quarters of quotes priced by the hour.
| Charge | Published 2026 estimate | What to check |
|---|---|---|
| Standard hourly rate | About $80–$140 per hour | Billing increments, minimum charge and whether GST is included |
| Call-out / service fee | About $50–$140 | Whether it covers travel only, or travel plus the first part of the job |
| After-hours hourly rate | About $120–$280 per hour | Separate after-hours call-out fee; weekend and public holiday loadings |
| Fixed-price job | Varies by job | Exactly what is included: parts, labour, testing, certificate and GST |
How call-out fees and hourly rates work
A call-out or service fee pays for the electrician to come to your property. Yellow Pages describes it as covering travel, inspection and preparation, and notes that for very small tasks some electricians charge only the call-out fee. Other businesses fold the call-out into a higher first-hour rate instead. After the first block of time, many electricians bill in 15-minute increments.
This is why a low advertised hourly rate does not always mean a cheaper job. Two electricians with the same hourly rate can produce quite different invoices once call-out fees, minimum charges and materials are added. For fault-finding, where nobody knows how long the job will take, expect to pay for diagnostic time. For a clearly described job, such as replacing an existing light fitting, a fixed price is often possible.
Ask before booking: ‘What will I pay if you attend, diagnose the problem and I decide not to go ahead with the repair?’
What do common electrical jobs cost?
The figures below are published estimates for common household jobs. Some are quoted per item, others as an average total per job across many quotes, so they are not directly comparable with each other. None of them are prices offered by Local Electrician Finder or by any listed business.
| Job | Published indicative cost | What moves the price |
|---|---|---|
| New power point | About $140–$180 per outlet; average quoted job about $375 | Brick walls, new circuits, number of outlets |
| LED downlights | About $60–$75 per light installed (indoor) | Number of lights, ceiling access, supply of fittings |
| Ceiling fan installation | Average quoted job about $431 | Existing wiring or a new point, ceiling height, number of fans |
| Safety switch (RCD) | About $85–$200; $500–$1,200 if the switchboard needs upgrading | Board condition and space for new devices |
| Switchboard upgrade | Average quoted job about $1,291 | Board size, old fuses or asbestos panel, extra circuits |
| Hard-wired smoke alarm | About $150 per alarm; average quoted job about $322 | Number of alarms, interconnection, new wiring |
| EV wall charger | Hardware about $600–$2,500 plus installation about $500–$1,500 | Distance from the switchboard, single or three-phase, board upgrades |
| Full rewire (3-bedroom house) | About $8,500–$16,000 (Melbourne estimate, incl. GST) | Home size, wall and roof access, switchboard replacement |
Larger jobs: switchboards, EV chargers and rewiring
Bigger jobs vary more because the scope is harder to pin down from a phone call. A safety switch can be a modest job on a modern board, but if there is no room for it, or the board still has old ceramic fuses, the electrician may recommend a switchboard upgrade instead. Yellow Pages notes this can lift the cost into the $500–$1,200 range, and ServiceSeeking's average quoted switchboard job was about $1,291.
EV chargers are similar. The NRMA separates the cost of the wall charger itself from installation and says the install price depends on how far the charger is from the switchboard, the condition of the home's wiring and whether upgrades are needed. The NSW Government gives an even wider range of about $200 to more than $5,000 per charging unit installed, because the options range from a smart power point to a three-phase wall charger.
A full rewire is usually the largest household job. One Melbourne electrical business publishes $8,500–$16,000 for a typical 3-bedroom house in 2026, and notes that cheaper quotes sometimes leave out the switchboard, the safety certificate or patching after cables are run.
After-hours and emergency electrician rates
Evening, weekend and public holiday call-outs generally cost more. An independent Australian cost guide updated in November 2026 puts after-hours rates at about $130–$280 an hour and after-hours call-out fees at about $150–$500, and a 2026 guide from a Brisbane electrical business gives about $120–$250 an hour, with weekends and public holidays potentially higher. Ask for both the after-hours call-out fee and the hourly rate before the electrician is dispatched.
If the problem is a single dead power point or a light that has stopped working, and nothing is hot, sparking or smelling of burning, it may be cheaper and perfectly safe to switch off that circuit and book a standard-hours visit. Price should never come before safety, though.
- Fire, someone injured or receiving an electric shock, or any danger to life: call 000 first.
- Fallen powerlines or damaged street supply: stay well clear and call your local electricity distributor's faults and emergencies line.
- A power outage affecting your street: this is a network issue for the distributor, not a job for a private electrician.
- Sparking, burning smells or a hot switchboard inside your home: if safe to do so, turn off the main switch and call a licensed electrician.
Example: how an electrician's invoice adds up
Imagine an electrician quotes a $100 call-out fee, then $110 an hour for labour, billed in 15-minute blocks. Installing two new power points on an existing circuit takes an hour and a half, so labour is $165. Two outlets and some cable add $60 in materials. If every figure includes GST, the total is $325.
Now suppose the call-out fee already covers the first 30 minutes on site. Only one hour of labour should then be billed on top, and the total would be $270. The same job, at the same hourly rate, can produce two different invoices depending on how the business structures its fees.
This example is illustrative only, not an average price, a real quote or a recommended rate.
| Invoice line | Illustrative amount |
|---|---|
| Call-out fee | $100 |
| Labour: 1.5 hours at $110/hour | $165 |
| Materials: 2 power points and cable | $60 |
| Total (GST included) | $325 |
What changes the final price?
- Location: rates and travel time differ between capital cities, suburbs and regional areas.
- Access: open roof space is quicker to work in than a low roof, a concrete slab or double-brick walls.
- Age of the home: older wiring, old fuse boards or an asbestos-backed switchboard can add work.
- Materials: fittings, fans, chargers and safety switches may be supplied by you or the electrician, and quotes treat this differently.
- Timing: after-hours, weekend and public holiday work usually attracts higher rates.
- Scope changes: problems found once work starts, such as an overloaded circuit, may need a revised quote.
- Compliance paperwork: testing and the required certificate are part of the job, and some businesses list a certificate fee separately.
How to compare electrician quotes fairly
- Give each electrician the same written description of the job, with photos of the switchboard and work area if helpful.
- Ask whether the price is fixed or an estimate, and how extra work will be approved before it is done.
- Compare like with like: call-out fee, labour, materials, testing, the compliance certificate, removal of old fittings and GST.
- For bigger jobs, check whether the quote includes a switchboard upgrade, patching or an inspection where your state requires one.
- Ask for the electrician's or contractor's licence number and check it yourself on your state or territory regulator's public register.
- Keep the written quote, the invoice and the compliance certificate together for your records.
Local Electrician Finder lists businesses ranked by Google rating and review count. We do not check licences, recommend businesses, take bookings or guarantee work, so always verify a licence directly with your state regulator.
The compliance certificate you should receive
Electrical work in Australia must be done by a licensed electrician, and in most states the electrician must give you a certificate once installation work is tested. The name and the deadline differ by state. The certificate is not an optional extra: it is your record that the work was tested and complies, and it can matter for insurance and future sales. If you don't receive one, contact the electrician first, then your state regulator.
| State | Certificate | What the official guidance says |
|---|---|---|
| Victoria | Certificate of Electrical Safety (COES) | For non-prescribed work such as lights and power points, a copy within 30 days. Prescribed work such as switchboards and solar must be inspected first, with a copy within 4 days of the certificate being completed. |
| New South Wales | Certificate of Compliance for Electrical Work (CCEW) | Submitted to Building Commission NSW within seven days of testing; the electrician can email you a copy through the eCert portal. |
| Queensland | Certificate of testing and compliance (installation work) or certificate of testing and safety | Given as soon as possible after the work is tested or completed. |
| Western Australia | Electrical safety certificate | Within 28 days for electrical installation work (not maintenance or like-for-like replacements). |
| South Australia | Electronic certificate of compliance (eCoC) | Within 30 days of the electrical job being completed. |
Frequently asked questions
How much does an electrician charge per hour in Australia?
Published 2026 guides put most residential electricians at roughly $80 to $140 an hour, often with a call-out fee of about $50 to $140. Rates vary with location, the type of job and when you book, so ask for the full fee structure in writing.
Do electricians charge a call-out fee?
Many do. It usually covers travel and the first part of the visit, but what it includes varies. Some electricians skip the call-out fee and charge a higher rate for the first hour instead.
Are materials included in an electrician's quote?
Not always. Ask for an itemised quote that separates labour, materials, the compliance certificate and GST, and confirm whether you or the electrician is supplying items such as fans, lights or an EV charger.
Should I be charged for the compliance certificate?
The certificate is a legal requirement for installation work in most states. In Victoria, Energy Safe Victoria says electricians may pass on the certificate's purchase cost and may add a handling fee, which should be explained to you. Elsewhere, check your state's rules and ask before work starts.
Can I get an exact price over the phone?
For simple, clearly described jobs, sometimes. For fault-finding, switchboard work, EV chargers and rewiring, an electrician usually needs to see the site before giving a firm price.
Sources
We reviewed Australian pricing guides and official state guidance in November 2026. Prices are published market estimates and platform averages, not our own survey or transaction data, and they can change. For a reliable figure, request a written quote from a licensed electrician.
- Yellow Pages: How much does an electrician cost? [2026]Hourly, call-out and per-job estimates; last updated May 2026
- ServiceSeeking: Electrician Prices in 2026Platform quote data; February 2026
- ServiceSeeking: Switchboard Upgrade Cost & Prices in Australia 2026Platform quote data; July 2026
- ServiceSeeking: Powerpoint Installation and Repair Cost Guide 2026Platform quote data; July 2026
- ServiceSeeking: Ceiling Fan Installation Price Guide 2026Platform quote data; July 2026
- ServiceSeeking: Smoke Alarm Installation and Replacement Cost in Australia (2026)Platform quote data; July 2026
- NRMA: How much will it cost to install an EV charger at home?EV charger hardware and installation estimates; July 2026
- NSW Government: Home electric vehicle chargersInstalled cost range per charging unit; updated July 2026
- King & Sons Electrical: How much does it cost to rewire a house in Melbourne?One Melbourne business's 2026 estimate; October 2026; not a national survey
- Tiger Electrical: How much does an emergency electrician cost?One Brisbane business's 2026 after-hours estimate; updated July 2026; not a national survey
- Energy Safe Victoria: Certificates of Electrical Safety for consumersVictorian COES rules and fees; checked November 2026
- NSW Government: Electrical compliance requirements (CCEW)Building Commission NSW; updated October 2026
- Business Queensland: Electrical contractor safety dutiesQueensland certificates of testing; checked November 2026
- WA Government: Having electrical work doneBuilding and Energy electrical safety certificates; checked November 2026
- SA Government: Certificates of complianceeCoC timeframes; checked November 2026
- Triple Zero (000)When to call 000 in an emergency
- What's The Damage? – Electrician cost AustraliaIndependent cost guide; updated November 2026
General information only, checked against the sources above on 20 November 2026. Rules and prices change and differ between states; for advice on your situation, talk to a licensed electrician or your state's electrical regulator.

